Table 39 Saving A Configuration Database - Honeywell ST 3000 User Manual

8— Operation - Saving and Restoring a Configuration Database
Procedures
The procedure in Table 39 outlines the steps for saving a configuration database from a transmitter.
Table 40 provides the procedure for downloading (sending) a saved configuration database to a transmitter.
Step
1 Connect communicator across loop wiring for transmitter with configuration database to be
saved and turn it on.
2 Starting at the "Online" menu, choose SAVE. The Save as . . . screen will appear.
3 Select Location and choose the memory location where you want to save the transmitter
configuration, (Module, data pack or PC, if available). Press ENTER.
Select Name and type in the name of the configuration file. Press ENTER.
4
5 Select Data Type and choose either Standard or Full (for PC). Press ENTER.
6 Press SAVE. A prompt may say that some variables in this configuration were not marked
because they were not read. Press OK.
A prompt may ask if you want to overwrite the existing configuration memory.
Press YES or NO.
The Online screen will appear when save is completed.
7 Disconnect communicator from transmitter loop wiring and turn communicator off.
94

Table 39 Saving a Configuration Database

ST3000:PT 3011
Save as . . .
1 Location
2 Name
3 Data Type
HELP SAVE
ST 3000 HART Transmitter Release 300 User Manual
Action
Module
Standard
10/05