SV units— Selecting Secondary Variable units
You can select the temperature units for display of the secondary variable, which is the meter body
temperature.
Step
1
From "Online" menu, select "Device setup" and press right arrow key.
2
Scroll down to "Basic setup" and press right arrow key.
3
Scroll down to "SV Unit" and press right arrow key.
Use the [ ⇑ ] and [ ⇓ ] keys to scroll down to highlight the desired temperature units:
4
5
When the desired selection is highlighted, press ENTER.
Pressing ESC will cancel procedure without changing unit selection.
6
Either:
•
press SEND to download change to transmitter, or
•
go to another procedure and continue making changes.
10/05
6— Configuration - SV units— Selecting Secondary Variable units
Table 25 Selecting SV Temperature Units
degC
degF
ST 3000 HART Transmitter Release 300 User Manual
Action
degR
Kelvin
63