Saving And Restoring A Configuration Database; Figure 37 Summary Of Save And Restore Database Function - Honeywell ST 3000 User Manual

Saving and Restoring a Configuration Database

Background
If it ever becomes necessary to replace a damaged transmitter with a spare, you can save the configuration
database from the damaged transmitter to the memory module or data pack installed in the communicator,
then restore (or send) the saved configuration database from that memory to the spare transmitter. In fact,
you can restore the saved configuration database in any number of transmitters as long as you change the
tag number (ID) in the restored database.
Figure 37 shows a graphic summary of the save and restore database function.
Saved Configuration Database
Pressure unit
Pres damp
Pres URV
Pres LRV
Pres xfer fnctn
Temp unit
Tag
Message
Working
Memory
ST 3000
10/05
inH2O
0.48 s
400 inH2O
0 inH2O
Linear
degC
PT3011
Tank Pressure
SAVE

Figure 37 Summary of Save and Restore Database Function

ST 3000 HART Transmitter Release 300 User Manual
8— Operation - Saving and Restoring a Configuration Database
Memory Module
or
Data Pack
Communicator
Restored Configuration Database
Pressure unit inH2O
Pres damp 0.48 s
Pres URV 400 inH2O
Pres LRV 0 inH2O
Pres xfer fnctn
Linear
Temp unit degC
Tag PT3011
Message
Tank Pressure
Working
Memory
SEND
ST 3000
93