Honeywell ST 3000 User Manual page 67

Interface characteristics
Keep in mind the following display-selection descriptions when configuring a transmitter. These selections
are highlighted at the bottom of the display screen, directly above the four function keys at the top of the
communicator's keypad (F1, F2, F3, and F4). To make desired highlighted selection, press the
corresponding function key.
Function Key
HOME
EXIT
END
ABORT
ESC
SEND
NEXT and PREV
ENTER
HELP
DEL
Symbols
Symbol
♥
⇑
and/or
⇒
[>>>]
ATTENTION
An alternate way of selecting a menu item, besides using the up and down arrows, is to press
the key corresponding to the number left of the desired menu item.
10/05
Takes you back to the "Online" display.
Backs you out of the current display.
Backs you out of one level to the next higher level.
Cancels a procedure backing you out of current display, and allows you to
make another choice.
Cancels a procedure backing you out of current display, and allows you to
make another choice.
Downloads the contents of the communicator's working memory to the
transmitter's memory. Changes made in the communicator's working
memory are not transferred to the transmitter until a SEND command is
issued.
If you have not sent the changes and are about to turn off the
communicator, you will receive a prompt warning you that there is unsent
data and asking if you want to send it before shutting off.
Allows you to scroll through a list of configured parameters.
Allows you to choose the highlighted selection or to continue after
performing an action, such as removing the loop from automatic control.
Gives a brief definition/explanation of the current selection or display.
Deletes character directly beneath flashing cursor.
Flashing heart icon in the upper right corner of display screen indicates that
the transmitter and communicator are "talking."
When this symbol appears on the display screen it indicates that you can
press the left arrow on the keypad to back out to another display.
⇓
These arrows appear on the display screen to indicate there is more
information to scroll through, using the indicated arrow on the keypad.
This arrow appears on the display screen to indicate that a menu item
contains more information that can be accessed by pressing the right arrow
on the keypad.
This "hot" key on the keypad allows you to access range values (LRV,
URV, LRL, and URL) directly. When finished, you return to the spot from
which you started.
ST 3000 HART Transmitter Release 300 User Manual
6— Configuration - Configuration Overview
Description or Action
Description or Action
53