8- Operation; Introduction; Accessing Operation Data - Honeywell ST 3000 User Manual

Introduction

About this section
This section identifies how to access typical data associated with the operation of an ST 3000 transmitter.
It also includes procedures for:
changing the default failsafe direction of the transmitter's output,
changing the read/write access of the transmitter's configuration database, and
saving and/or restoring a transmitter's configuration database.

Accessing Operation Data

Summary
You can access this data relevant to the operation of the transmitter using a hand-held communicator.
Input
Output in % or milliamperes
Upper and Lower Range Limits
Status
Table 36 summarizes the steps required to access given operation data from the transmitter. These steps
assume that communicator communications have been established with the transmitter. All steps start at the
"Online" (or HOME) display. The values shown in displays are for example purposes only.
10/05
8— Operation
ST 3000 HART Transmitter Release 300 User Manual
8— Operation - Introduction
Failsafe Output Direction
Sensor Temperature
Messages
87