Symbol Definitions - Honeywell ST 3000 User Manual

About This Document
Technical Assistance
If you encounter a problem with your ST 3000 Smart Transmitter, check to see how your transmitter is
currently configured to verify that all selections are consistent with your application.
If the problem persists, you can reach Honeywell's Solution Support Center for technical support by
telephone during normal business hours. An engineer will discuss your problem with you. Please have your
complete model number, serial number, and software revision number on hand for reference. You can find
the model and serial numbers on the transmitter nameplates. You may also seek additional help by
contacting the Honeywell distributor who supplied your ST 3000 transmitter.
By Telephone
By E-mail
Problem Resolution
If it is determined that a hardware problem exists, a replacement transmitter or part will be shipped with
instructions for returning the defective unit. Please do not return your transmitter without authorization
from Honeywell's Solution Support Center or until the replacement has been received.

Symbol definitions

The following table lists those symbols used in this document to denote certain conditions.
Symbol
iv
Technical Assistance
Honeywell Solution Support Center
This CAUTION symbol on the equipment refers the user to the Product Manual for
additional information. This symbol appears next to required information in the manual.
This WARNING symbol on the equipment refers the user to the Product Manual for
additional information. This symbol appears next to required information in the manual.
WARNING: risk of electrical shock. This symbol warns the user of a potential shock
hazard where HAZARDOUS LIVE voltages greater than 30 Vrms, 42.4 Vpeak, or 60
VDC may be accessible.
ATTENTION, Electrostatic Discharge (ESD) hazards. Observe precautions for
handling electrostatic sensitive devices
Protective Earth (PE) terminal. Provided for connection of the protective earth (green
or green/yellow) supply system conductor.
Earth Ground. Functional earth connection. NOTE: This connection shall be bonded to
Protective earth at the source of supply in accordance with national and local electrical
code requirements.
ST 3000 HART Transmitter Release 300 User Manual
In the U. S: 1-800-423-9883
Outside the U.S:
ace@honeywell.com
Definition
Contact
1-602-313-6510
10/05