1— Introduction - First Time Users Only - ST 3000 Smart Transmitters
ST 3000 Smart Transmitters
About the transmitter
The ST 3000 Smart Transmitter comes in a variety of models for measurement applications involving one
of these basic types of pressure:
•
Differential Pressure
•
Gauge Pressure
•
Absolute Pressure
The transmitter measures the process pressure and transmits an output signal proportional to the measured
variable over a 4 to 20 milliampere, two-wire loop. Its major components are an electronics housing and a
meter body as shown in Figure 1 for a typical differential pressure model transmitter.
2
Figure 1 Typical ST 3000 Differential Pressure Transmitter.
ST 3000 HART Transmitter Release 300 User Manual
Electronics
Housing
Meter Body
10/05