Chapter 3 - Device Operation; Turn The Device On & Off - Honeywell Midas S2 User Manual

CHAPTER
3
DEVICE OPERATION
3.1 Turn the device on & off
FIGURE 3 -1: Turn the device on & off
CAUTION
RISK OF PROPERTY DAMAGE
DO NOT disassemble the main module with the power ON status
NOTE: Please press to turn the device off. In another case, such as plugging the power cable
out, including PoE, the device can be powered on automatically. Midas S2 records the last
power-off condition and reproduces that status to prevent it from not working when the power
comes back after an unintentional sudden power interruption. Please note this, and if you want
to keep the power off while it is connected, press
Midas S2 23 User Manual