Chapter 3. Terminal Menu Operation and Structure
Static Routes/Private
Write security: 4; Read security: 5
When set to No, the Express L768 will advertise this static route using
RIP. Otherwise, setting to Yes means that the route is kept private.
»» IP/IP Router
The IP router is configured under this menu as follows.
IP Router/Mode
Write security: 3; Read security: 5
When this option is set to On (def), the Express L768 will advertise and
listen to routes from other IP routers. If Off, the route table is still used
but only static routes are used for routing IP packets and only the
Ethernet port is used. IP packets can be sent over the WAN, but only
when bridged.
IP/RIP
Write security: 3; Read security: 5
The Routing Information Protocol (RIP) is supported by the Express
L768. The following parameters are required for setting up the mode
on the Ethernet port:
RIP/Mode
Write security: 3; Read security: 5
This option turns RIP On (def) or Off
RIP/Protocol
Write security: 3; Read security: 5
Version can be V1 (def) or V2.
3-14
Express L768 User Manual
61203192L1-20