Table of Contents
Advertisement
Quick Gateway Configuration
Warning:
Do not press the
cular hole on the rear panel. If you want to restore the default settings, insert a thin wire (such as a paper clip) into the
hole, press gently for 1 second, and then release the button. The system reboots and returns to the factory defaults.
Logging in to your gateway
To change the settings on your gateway, you must log in the gateway's interface. Make sure that you have completed the
steps in
"Installation"
before you begin.
1. Open your internet browser application and type 192.168.1.1 into the address line. The login dialog appears.
2. Enter the factory default credentials shown below and click OK. The Device Info summary page appears.
User
Note: Your service provider may use other settings. Contact your provider for details.
Reset
button unless you want to clear the current settings. The
Name: admin
Password: admin
Reset
button is in a small cir-
Hide quick links:
Advertisement
Table of Contents
