Filter Defines /Ipx Filter Defines - ADTRAN Express XL 1200070L1 User Manual

Dst Port Cmpr
Proto
Proto Cmpr
TCP Est

Filter Defines /IPX Filter Defines

Write security: 2; Read security: 3
The IPX filter defines apply to any IPX packet whether it is routed or bridged.
Also, any IPX encapsulation type will be accounted for. Up to 32 IPX defines
can be specified.
Name
Src Net
Src Mask
Dest Net
Dest Mask
Src Socket
Src Socket Comp Type of comparison that is performed:
Dest Socket
61200.070L1-1
Chapter 3: Terminal Menu Operation and Structure
Type of comparison that is performed
= - means ports equal to
not = - means port not equal to
> - means port greater than
< - means port less than
None - means the destination port is not
compared
Protocol used for comparison. Range: 0 to 255.
(decimal format)
Type of comparison that is performed
= - means protocols equal to
not = - means protocols not equal to
> - means protocols greater than
< - means protocols less than
None - means the protocol is not compared
Yes - only when TCP established
No - only when TCP not established
Ignore - ignore TCP flags
Identifies the filter entry (15 characters max)
32-bit source network address
Bits in the source network address which are
compared. (hexadecimal format)
32-bit destination network address
Bits in the destination network address which
are compared. (hexadecimal format)
16-bit value which is the source socket.
Range is 0-65535.
= - means socket equal to
Not = - means socket not equal to
> - means socket greater than
< - means socket less than
None - no comparison is done on source
socket
16-bit value which is the destination socket. Range
is 0-65535.
Express XL/XLT User Manual 61