Table of Contents
Advertisement
Management/SNMP
The Express L128/L128T is an SNMP agent. It can respond to Get-Requests
and generate traps. These two lists set up the manager, communities, and lev-
els. See Appendix C on page 139 for more information on SNMP.
SNMP Access
Write security: 3; Read security: 5
When set to No, SNMP access is denied. When set to On (def), the Express
L128/L128T will respond to SNMP managers based on the following lists.
SNMP/Communities
This list is used to set up to eight SNMP communities names that the Express
L128/L128T will allow. Factory default sets the community "public" with
"Get" privileges.
Communities/Name
Write security: 1; Read security: 3
This is a text string for the community name.
Communities/Privilege
Write security: 1; Read security: 3
The access for this manager can be assigned three levels.
None - No access is allowed for this community or manager.
Get - Manager can only read items.
Get/Set - Manager can read and set items.
Communities/Manager IP
Write security: 1; Read security: 3
This is the IP address of SNMP manager. If set to 0.0.0.0, any SNMP manager
can access the Express L128/L128T for this community.
SNMP/Traps
The Express L128/L128T can generate SNMP traps. See Appendix C on
page 139 for trap types supported. This list allows up to four managers to be
listed to receive traps.
61202.070L1-1
Chapter 3: Terminal Menu Operation and Structure
Express L128/L128T User Manual
85
Advertisement
Table of Contents
