Figure 8-14 Event Mask Setup Motion Events; Figure 8-15 Event Mask Setup Alarm Events - Honeywell HRDVS Reference Manual

Table of Contents

Advertisement

Calendar Setup
Rev 2.00
Figure 8-14
Event Mask Setup Motion Events
c.
Accept your changes and press Enter.
7.
Set up Normal recording mode to record during regular hours. See
Timelapse Recording
8.
To set up Event Mask for Normal recording hours:
a.
On the Alternate Setup screen, select Normal. The Event Mask Setup screen for
Normal recording displays.
b.
Enable the alarm events you wish used in Normal recording mode. In the
example shown below, alarm events 1 and 2 are enabled.
Figure 8-15
Event Mask Setup Alarm Events
c.
Accept your changes and press Enter.
Your HRDVS is now set to record timelapse and alarm events weekdays from 8:30 a.m. to
5:30 p.m. and motion events only (no timelapse) after 5:30 on weekdays and for 24 hours,
Saturday and Sunday.
Setup.
52
Chapter 10,
Document 900.0281
02/07

Advertisement

Table of Contents
loading

Table of Contents