Video Playback and Searching
Playing Back the Most Recently Recorded Clip
Playback Cycling of Recorded Camera Views
Rev 2.00
This chapter describes how you can search for and play back video clips:
•
From the most recently recorded clips
•
Using the Reports function
•
Using the Search function
To play back the most recent video clip recorded:
1.
HRDVS1, HRDVS4, HRDVS8:
Press
on the HRDVS front panel.
HRDVS16:
Press FUNCTION + Camera 15 ( ).
2.
If passwords are enabled, enter a user ID and password when prompted, then press
Enter.
The video plays back on your monitor.
Caution
Recording stops during Playback mode.
After entering playback mode, the HRDVS retrieves the most recently stored video clip. If
several cameras have been enabled to record at the same time, the monitor will cycle
through displayed images from all cameras that have been recorded. This allows you to
identify which camera view you prefer to view in detail.
A lower Global Record rate slows down the playback of camera views but reduces the
images per second recorded by the HRDVS.
83
15
Document 900.0281
02/07