Table of Contents
Advertisement
Field (cont'd)
Alarm
Record Cameras
Display Cameras
Rev 2.00
Description
Enable or disable whether the HRDVS triggers an alarm output contact (to activate
a device you have connected to the alarm output contact such as an external light
or bell). The Alarm LED illuminates on the front panel when an alarm event is
triggered.
Enable alarm event recording for camera(s). The number of cameras depends on
your HRDVS model:
•
HRDVS1: one camera
•
HRDVS4: up to 4 cameras
•
HRDVS8: up to 8 cameras
•
HRDVS16: up to 16 cameras
If all record camera(s) are disabled and the recorder is programmed to record
timelapse video, the unit continues to record timelapse and display the display
camera(s) in the Alarm Event screen.
Set which cameras you wish to display on the monitor in the event of an alarm. The
duration will depend on the Reset Type you select.
4.
When you are satisfied with your settings, select Accept, then press Enter to exit this
screen.
69
HRDVS Reference Guide
Document 900.0281
02/07
Advertisement
Table of Contents
