Ip Group - Draytek Vigor 3200 Series User Manual

Item
Start IP Address
End IP Address
Subnet Mask
Invert Selection
Below is an example of IP objects settings.
4 . 6 . 2 I P G r o u p
4 . 6 . 2 I P G r o u p
This page allows you to bind several IP objects into one IP group.
Available settings are explained as follows:
Item
Name
Set to Factory Default
Vigor3200 Series User's Guide
Description
Type the start IP address for Single Address type.
Type the end IP address if the Range Address type is selected.
Type the subnet mask if the Subnet Address type is selected.
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
Description
Display a name for this IP group profile.
Clear all profiles.
178