Ipsec Peer Identity - Draytek Vigor 3200 Series User Manual

Item
IPSec Security Method
After finishing all the settings here, please click OK to save the configuration.
4 . 1 0 . 6 I P S e c P e e
4 . 1 0 . 6 I P S e c P e e
To use digital certificate for peer authentication in either LAN-to-LAN connection or Remote
User Dial-In connection, here you may edit a table of peer certificate for selection. As shown
below, the router provides 32 entries of digital certificates for peer dial-in users.
Each item will be explained as follows:
Item
Set to Factory Default
Index
Name
Description
Pre-Shared Key -Currently only support Pre-Shared Key
authentication.
Pre-Shared Key- Specify a key for IKE authentication
Confirm Pre-Shared Key- Retype the characters to confirm
the pre-shared key.
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
active.
High - Encapsulating Security Payload (ESP) means payload
(data) will be encrypted and authenticated. You may select
encryption algorithm from Data Encryption Standard (DES),
Triple DES (3DES), and AES.
r I d e n t i t y
r I d e n t i t y
Description
Click it to clear all indexes.
Click the number below Index to access into the setting page
of IPSec Peer Identity.
Display the profile name of that index.
241 Vigor3200 Series User's Guide