Ip Group - Draytek VIGOR2950 User Manual

Start IP Address
End IP Address
Subnet Mask
Invert Select
Below is an example of IP objects settings.
3 . 5 . 2 I P G r o u
3 . 5 . 2 I P G r o u
This page allows you to bind several IP objects into one IP group.
Set to Factory Default
Click the number under Index column for settings in detail.
62
p
p
only.
Select Range Address if this object contains several IPs
within a range.
Select Subnet Address if this object contains one subnet for
IP address.
Select Any Address if this object contains any IP address.
Type the start IP address for Single Address type.
Type the end IP address if the Range Address type is selected.
Type the subnet mask if the Subnet Address type is selected.
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
Clear all profiles.
Vigor2950 Series User's Guide