Draytek Vigor 3200 Series User Manual page 256

Item
User Name
Password
Enable Mobile
One-Time Passwords
(mOTP)
IKE Authentication
Method
IPSec Security Method
Vigor3200 Series User's Guide
Description
Draytek SSL VPN portal interface. From the web page, you
will see the message to indicate that you have the privilege for
the SSL Web Proxy.
If you haven't set any SSL VPN web proxy profiles, you will a
link here. Click this link to access into the configuration page
of SSL VPN.
Note: SSL VPN can be applied in browser (e.g., IE) which
supports ActivateX only.
This field is applicable when you select PPTP or L2TP with or
without IPSec policy above.
This field is applicable when you select PPTP or L2TP with or
without IPSec policy above.
Check this box to make the authentication with mOTP
function.
PIN Code – Type the code for authentication (e.g, 1234).
Secret – Use the 32 digit-secret number generated by mOTP in
the mobile phone (e.g., e759bb6f0e94c7ab4fe6).
This group of fields is applicable for IPSec Tunnels and L2TP
with IPSec Policy when you specify the IP address of the
remote node. The only exception is Digital Signature (X.509)
can be set when you select IPSec tunnel either with or without
specify the IP address of the remote node.
Pre-Shared Key - Check the box of Pre-Shared Key to invoke
this function and type in the required characters (1-63) as the
pre-shared key.
Digital Signature (X.509) – Check the box of Digital
Signature to invoke this function and Select one predefined
Profiles set in the VPN and Remote Access >>IPSec Peer
Identity.
This group of fields is a must for IPSec Tunnels and L2TP
with IPSec Policy when you specify the remote node. Check
the Medium, DES, 3DES or AES box as the security method.
Medium-Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
invoked. You can uncheck it to disable it.
246