Draytek Vigor 3200 Series User Manual page 31

2 . 3 . 1 . 3 S t a t i c I P
2 . 3 . 1 . 3 S t a t i c I P
1. Choose WAN1/WAN2/WAN3/WAN4 as the WAN Interface and click the Next button.
The following page will be open for you to specify Internet Access Type.
2. Click Static IP as the protocol. Type in all the information that your ISP provides for this
protocol.
Available settings are explained as follows:
Item
WAN IP
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Description
Type the IP address.
Type the subnet mask.
Type the IP address of gateway.
Type in the primary IP address for the router.
Type in secondary IP address for necessity in the future.
21 Vigor3200 Series User's Guide