Draytek Vigor 3200 Series User Manual page 116

After finished the above settings, click OK to save the settings.
F o r W A
F o r W A
To use 3G network connection through 3G USB Modem, please configure WAN5 interface.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical type
Line Speed
Send Mail Alert if line
drops out
Vigor3200 Series User's Guide
When any WAN disconnect – WAN1 will be activated
when any WAN interface disconnects.
When all WAN disconnect – WAN1 will be activated when
all the WAN interfaces disconnect.
N 5 ( U S B )
N 5 ( U S B )
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
For such WAN interface is fixed to USB network connection,
it is not necessary to specify physical type.
If your choose According to Line Speed as the Load
Balance Mode, please type the line speed for downloading
and uploading for such WAN interface. The unit is kbps.
Check the box to enable this function. When the network
connection is off, the system will send a mail alert to notify
the administrator.
106