Vpn Trunk Management - Draytek Vigor 3200 Series User Manual

Item
2. After finishing all the settings here, please click OK to save the configuration.
4 . 1 0 . 9 V P N T R U N
4 . 1 0 . 9 V P N T R U N
VPN trunk includes four features - VPN Backup, VPN load balance, GRE over IPSec, and
Binding tunnel policy.
F e a t u r e s o
F e a t u r e s o
VPN TRUNK Management is a backup mechanism which can set multiple VPN tunnels as
backup tunnel. It can assure the network connection not to be cut off due to network
environment blocked by any reason.
PN TRUNK-VPN Backup mechanism
V
environment of VPN server and correct it to complete the backup of VPN Tunnel in
real-time.
PN TRUNK-VPN Backup mechanism
V
(single/multi)
Description
Local Network IP / Local Network Mask - Add a static route
to direct all traffic destined to Local Network IP Address/Local
Network Mask through the VPN connection.
More - Add a static route to direct all traffic destined to more
Remote Network IP Addresses/ Remote Network Mask
through the VPN connection. This is usually used when you
find there are several subnets behind the remote VPN router.
RIP Direction - The option specifies the direction of RIP
(Routing Information Protocol) packets. You can
enable/disable one of direction here. Herein, we provide four
options: TX/RX Both, TX Only, RX Only, and Disable.
From first subnet to remote network, you have to do -
If the remote network only allows you to dial in with single IP,
please choose NAT, otherwise choose Route.
Change default route to this VPN tunnel - Check this box to
change the default route with this VPN tunnel. Note that this
setting is available only for one WAN interface is enabled. It is
not available when both WAN interfaces are enabled.
K M a n a g e m e n t
K M a n a g e m e n t
f V P N T R U N K – V P
f V P N T R U N K – V P
N B a c k u p M e c h a n
N B a c k u p M e c h a n
can judge abnormal situation for the
is compliant with all WAN modes
255
i s m
i s m
Vigor3200 Series User's Guide