Lan To Lan - Draytek Vigor 3200 Series User Manual

Item
After finishing all the settings here, please click OK to save the configuration.
4 . 1 0 . 8 L A N t o L A
4 . 1 0 . 8 L A N t o L A
Here you can manage LAN-to-LAN connections by maintaining a table of connection profiles.
You may set parameters including specified connection direction (dial-in or dial-out),
connection peer ID, connection type (VPN connection - including PPTP, IPSec Tunnel, and
L2TP by itself or over IPSec) and corresponding security methods, etc.
The router supports up to 64 VPN tunnels simultaneously. The following figure shows the
summary table.
Each item will be explained as follows:
Item
Set to Factory Default
Description
High-Encapsulating Security Payload (ESP) means payload
(data) will be encrypted and authenticated. You may select
encryption algorithm from Data Encryption Standard (DES),
Triple DES (3DES), and AES.
Local ID - Specify a local ID to be used for Dial-in setting in
the LAN-to-LAN Profile setup. This item is optional and can
be used only in IKE aggressive mode.
N
N
Description
Click to clear all indexes.
247 Vigor3200 Series User's Guide