For Vigor3200; For Vigor3200N - Draytek Vigor 3200 Series User Manual

1 . 2 . 2 F o r V i g o
1 . 2 . 2 F o r V i g o
LED
ACT (Activity)
USB
WLAN
VPN
WAN1-4
CSM
LED on Connector
WAN 1/2/3/4
DMZ
LAN
Vigor3200 Series User's Guide
r 3 2 0 0 n
r 3 2 0 0 n
Status
Blinking
Off
On
Blinking
On
Blinking
Off
On
On
Blinking
On
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Explanation
The router is powered on and running normally.
The router is powered off.
USB device is connected and ready for use.
The data is transmitting.
Wireless access point is ready.
Ethernet packets are transmitting over wireless
LAN.
The WLAN function is inactive.
The VPN tunnel is active.
The WAN1 ~ WAN4 connection is ready.
It will blink while transmitting data.
The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web Content Filter
application can be enabled from Firewall
>>General Setup. (Such profile must be
established under CSM menu).
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps when left
LED is on.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps when left
LED is on.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps when left
LED is on.
4