Draytek Vigor 3200 Series User Manual page 273

VPN Load Balance
Policy
Below shows the algorithm for Load Balance.
Edit – Click this radio button for assign a blank table for
configuring Binding Tunnel.
After insert – Click this radio button to adding a new binding
tunnel table.
Tunnel Bind Table Index- 128 Binding tunnel tables are
provided by this device. Specify the number of the tunnel for
such Load Balance profile.
Active – In-active/Delete can delete this binding tunnel table.
Active can activate this binding tunnel table.
Binding Dial Out Index – Specify connection type for
transmission by choosing the index (LAN to LAN Profile
Index) for such binding tunnel table.
Scr IP Start /End– Specify source IP addresses as starting
point and ending point.
Dest IP Start/End – Specify destination IP addresses as
starting point and ending point.
Dest Port Start /End– Specify destination service port as
starting point and ending point.
Protocol – Any means when the source IP, destination IP,
destination port and fragment conditions match with the
settings specified here, such binding tunnel table can be
established for TCP Service Port/UDP Service
Port/ICMP/IGMP specified here.
TCP means when the source IP, destination IP, destination
port and fragment conditions match with the settings specified
here and TCP Service Port also fits the number here, such
binding tunnel table can be established. UDP means when the
source IP, destination IP, destination port and fragment
conditions match with the settings specified here and UDP
Service Port also fits the number here, such binding tunnel
table can be established. TCP/UPD means when the source IP,
destination IP, destination port and fragment conditions match
with the settings specified here and TCP/UDP Service Port
also fits the number here, such binding tunnel table can be
established. ICMP means when the source IP, destination IP,
destination port and fragment conditions match with the
settings specified here and ICMP Service Port also fits the
number here, such binding tunnel table can be established.
IGMP means when the source IP, destination IP, destination
port and fragment conditions match with the settings specified
here and IGMP Service Port also fits the number here, such
binding tunnel table can be established. Other means when the
source IP, destination IP, destination port and fragment
conditions match with the settings specified here with different
TCP Service Port/UDP Service Port/ICMP/IGMP, such
binding tunnel table can be established.
263 Vigor3200 Series User's Guide