Draytek Vigor 3200 Series User Manual page 119

D e t a i l s P a g e f o r P
D e t a i l s P a g e f o r P
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.
Available settings are explained as follows:
Item
PPPoE Client Mode
ISP Access Setup
WAN Connection
Detection
P P o E i n W A N 1 ~ W
P P o E i n W A N 1 ~ W
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP.
Username – Type in the username provided by ISP in this
field.
Password – Type in the password provided by ISP in this
field.
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Application – Schedule web page and you can
use the number that you have set in that web page.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
109
A N 4
A N 4
Vigor3200 Series User's Guide