Draytek Vigor 3200 Series User Manual page 58

After finishing the above configuration, the equipment connecting to Vigor3200 LAN
Port can get the corresponding IP address of the network segment.
The equipment connecting to Vigor3200 LAN Port (LAN1) can get the IP address of
192.168.1.0/24.
The equipment connecting to Vigor3200 LAN Port (LAN2) can get the IP address of
192.168.2.0/24.
The equipment connecting to Vigor3200 LAN Port (LAN3) can get the IP address of
192.168.3.0/24.
The equipment connecting to Vigor3200 LAN Port (LAN4) can get the IP address of
192.168.4.0/24.
For the detailed settings of the network segment, open LAN>>General Setup and click
Details Page. Adjust the settings for your request. Refer to the following figure.
Vigor3200 Series User's Guide 48