Draytek Vigor 3200 Series User Manual page 246

When you check IPSec, you will see the following graphic:
Available settings are explained as follows:
Item
Profile Name
User Name
Password
Authentication
Type
Pre-Shared Key
Confirm
Pre-Shared Key
Digital Signature
(X.509)
Peer IP/VPN Client
IP
Peer ID
Remote Network IP
Vigor3200 Series User's Guide
Description
Type a name for such profile. The length of the file is limited
to 10 characters.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
Choose a proper authentication type for VPN connection.
For IPSec/L2TP IPSec authentication, you have to type a
pre-shared key.
Type the pre-shared key again for confirmation.
Check the box of Digital Signature to invoke this function.
Use the drop down list to choose one of the certificates for
using. You have to configure one certificate at least previously
in Certificate Management >> Local Certificate. Otherwise,
the setting you choose here will not be effective.
Type the WAN IP address or VPN client IP address for the
remote client.
Type the ID name for the remote client.
Please type one LAN IP address (according to the real location
236