Draytek Vigor 3200 Series User Manual page 242

Digital Signature
(X.509)
IPSec Security Method
User Name
Password
Remote Network IP
Remote Network Mask
After finishing the configuration, please click Next. The confirmation page will be shown as
follows. If there is no problem, you can click one of the radio buttons listed on the page and
click Finish to execute the next action.
Vigor3200 Series User's Guide
Click Digital Signature to invoke this function. Use the drop
down list to choose one of the certificates for using. You have
to configure one certificate at least previously in Certificate
Management >> Local Certificate. Otherwise, the setting
you choose here will not be effective.
Peer ID – Choose the peer ID selection from the drop down
list.
Local ID – Choose Alternative Subject Name First or
Subject Name First.
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
active.
High - Encapsulating Security Payload (ESP) means payload
(data) will be encrypted and authenticated. You may select
encryption algorithm from Data Encryption Standard (DES),
Triple DES (3DES), and AES.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
Please type one LAN IP address (according to the real location
of the remote host) for building VPN connection.
Please type the network mask (according to the real location of
the remote host) for building VPN connection.
232