Draytek Vigor 3200 Series User Manual page 123

Item
MTU
RIP Protocol
Bridge Mode
WAN IP Network
Settings
Description
It means Max Transmit Unit for packet. The default
setting is 1442.
Routing Information Protocol is abbreviated as RIP(RFC1058)
specifying how routers exchange routing tables information.
Click Enable RIP for activating this function.
If you check this box to invoke the function, the router will
work as a bridge. Such function is available only for WAN1.
This group allows you to obtain an IP address automatically
and allows you type in IP address manually.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using.
Obtain an IP address automatically – Click this button to
obtain the IP address automatically if you want to use
Dynamic IP mode.
Router Name: Type in the router name provided by ISP.
Domain Name: Type in the domain name that you have
assigned.
Specify an IP address – Click this radio button to specify
some data if you want to use Static IP mode.
IP Address: Type the IP address.
Subnet Mask: Type the subnet mask.
Gateway IP Address: Type the gateway IP address.
Default MAC Address: Click this radio button to use default
113 Vigor3200 Series User's Guide