Lucent Technologies DEFINITY User Manual page 51

Console Administration
To label the Trunk Group buttons:
1. From the Button Identification area, click the button labeled Trunk
Groups.
n
2. Label each Trunk Group button, just as it is administered at the switch.
3. When you are finished making changes, click Save.
n
To label the Hundreds Group buttons and associated Busy Lamp Fields:
1. From the Button Identification area, click the button labeled Hundreds
Groups.
n
Trunk Groups
Hundreds Groups, and their associated Busy Lamp Fields
Feature Buttons
Display Buttons
Twelve Trunk Group buttons, initially unlabeled, are displayed
across the screen.
These buttons perform the same function as Trunk Group buttons
on a non-PC based attendant console. Specifically, they allow the
attendant to select an outgoing trunk group. They can also be used
to select a code-calling or loudspeaker paging zone.
Each of these buttons must be labeled to identify the trunk group
with which it is associated. This is typically accomplished by
labeling each Trunk Group button according to the corresponding
location. For example, your buttons might be labeled " LA," " Dallas,"
" NY," and so forth.
NOTE:
Each button label can hold a maximum of six characters.
Your changes are saved.
Twenty Hundreds Group buttons, initially unlabeled, are displayed
across the screen.
When in the Console Operations area, each administered Hundreds
Group button will correspond to 100 Busy Lamp Fields.
Issue 2.5 October 1999
3-5