Operating in a Distributed Communications System
Environment
The call bar display for DCS busy verification does not indicate the status of the
attempt; such as " INVALID," " TERMINATED," " BRIDGED," or " OUT OF
SERVICE" .
Refer to Chapter 9, " Troubleshooting," for the procedures to activate the Busy
Verification of Telephones and Remote Trunks feature.
Call Forwarding All Calls
The operating procedures required to activate and deactivate this feature for an
extension at a remote switch are the same as those required at the local switch.
However, there are some restrictions on length of the forwarded-to number.
When using the console to forward the calls of a remote extension in a DCS
environment, the forwarded-to telephone number must not be longer than 10
digits. These 10 digits can include a 3-digit Facility Access Code followed by a
typical 7-digit telephone number. Also, no authorization codes can be included
in the forwarded-to telephone number.
Direct Trunk Group Selection
The operating procedures for this feature are the same as those required at the
local switch.
Trunk Group Busy/Warning Indicators
The Busy/Warning indicators provide the same indications for trunk groups at a
remote switch as they do for those at the local switch.
Issue 2.5 October 1999 7
-3