OSPF Interface Settings
This window is used to set up OSPF interfaces. If there are no IP interfaces configured (besides the default System interface), only
the System interface settings will appear listed. To change settings for in IP interface, click on the hyperlinked name of the
interface to see the configuration window for that interface.
To view this window, click L3 Features > OSPF > OSPF Interface Settings, as shown below.
Configure each IP interface individually using the OSPF Interface Settings - Edit window. Click the Apply button when you
have entered the settings. The new configuration appears listed in the OSPF Interface Settings window. To return to the OSPF
Interface Settings window, click the
OSPF interface settings are described below. Some OSPF interface settings require previously configured OSPF settings. Read the
descriptions below for details.
Parameter
Interface Name
Area ID
®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 8- 47. OSPF Interface Settings window
Figure 8- 48. OSPF Interface Settings - Edit window
Show All OSPF Interface Entries
Description
Displays the of an IP interface previously configured on the Switch.
Allows the entry of an OSPF Area ID configured above.
link.
196