Default Cost
OSPF Interface Settings
To set up OSPF interfaces, click the OSPF Interface Settings link to view OSPF settings for existing IP interfaces. If
there are no IP interfaces configured (besides the default System interface), only the System interface settings will appear
listed. To change settings for in IP interface, click on the hyperlinked name of the interface to see the configuration menu
for that interface.
Configure each IP interface individually using the OSPF Interface Settings – Edit window. Click the Apply button when
you have entered the settings. The new configuration appears listed in the OSPF Interface Settings table. To return to the
OSPF Interface Settings window, click the Show All OSPF Interface Entries link.
OSPF interface settings are described below.
DGS-3312SR Gigabit Layer 3 Switch
Displays the default cost for the route to the stub of between 0 and 65,535. The
default is 0.
Figure 5- 32. OSPF Interface Settings window
Figure 5- 33. OSPF Interface Settings - Edit window
117