D-Link DGS-3600 Series User Manual page 281

Layer 3 gigabit ethernet managed switch
Hide thumbs Also See for DGS-3600 Series:
Table of Contents

Advertisement

To view this windw, click ACL > CPU Interface Filtering > CPU Interface Filtering Table, as shown below.
To add an entry to the CPU Interface Filtering Table, click the Add Profile button. This will open the CPU Interface Filtering
Profile Configuration window, as shown below. There are four CPU Access Profile Configuration windows; one for Ethernet
(or MAC address-based) profile configuration, one for IP address-based profile configuration, one for the Packet Content Mask
and one for IPv6. Users can switch between the four CPU Access Profile Configuration windows by using the Type drop-down
menu. The window shown below is the CPU Interface Filtering Configuration window for Ethernet.
Figure 10- 26. CPU Interface Filtering Configuration window (Ethernet)
Parameter
Profile ID (1-5)
Type in a unique identifier number for this profile set. This value can be set from 1 to 5.
Type
Select profile based on Ethernet (MAC Address), IP address or Packet Content Mask or IPv6
address. This will change the menu according to the requirements for the type of profile.
VLAN
Selecting this option instructs the Switch to examine the VLAN identifier of each packet header
and use this as the full or partial criterion for forwarding.
Source MAC
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Destination MAC
Ethernet type
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Click Apply to set this entry in the Switch's memory.
®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 10- 25. CPU Interface Filtering Table window
Description
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select Packet Content Mask to specify a mask to hide the content of the packet
header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's
header.
263

Advertisement

Table of Contents
loading

Table of Contents