D-Link DGS-3600 Series User Manual page 262

VLAN
Source MAC
Destination MAC
802.1p
Ethernet type
The window shown below is the Access Profile Configuration window for IP.
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
header.
Select IP to instruct the Switch to examine the IP address in each frame's

header.
Select Packet Content Mask to specify a mask to hide the content of the packet

header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's

header.
Selecting this option instructs the Switch to examine the VLAN identifier of each packet
header and use this as the full or partial criterion for forwarding.
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Selecting this option instructs the Switch to examine the 802.1p priority value of each packet
header and use this as the, or part of the criterion for forwarding.
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Figure 10- 4. Access Profile Configuration window (IP)
244