D-Link DGS-3600 Series User Manual page 253

QoS
Bandwidth Control
QoS Scheduling Mechanism
QoS Output Scheduling
802.1p Default Priority
802.1p User Priority
The Switch supports 802.1p priority queuing Quality of Service. The following section discusses the implementation of QoS
(Quality of Service) and benefits of using 802.1p priority queuing.
Advantages of QoS
QoS is an implementation of the IEEE 802.1p standard that allows network administrators a method of reserving bandwidth for
important functions that require a large bandwidth or have a high priority, such as VoIP (voice-over Internet Protocol), web
browsing applications, file server applications or video conferencing. Not only can a larger bandwidth be created, but other less
critical traffic can be limited, so excessive bandwidth can be saved. The Switch has separate hardware queues on every physical
port to which packets from various applications can be mapped to, and, in turn prioritized. View the following map to see how the
Switch implements 802.1p priority queuing.
The previous picture shows the default priority setting for the Switch. Class-6 has the highest priority of the eight priority queues
on the Switch. In order to implement QoS, the user is required to instruct the Switch to examine the header of a packet to see if it
has the proper identifying tag tagged. Then the user may forward these tagged packets to designated queues on the Switch where
they will be emptied, based on priority.
For example, lets say a user wishes to have a video conference between two remotely set computers. The administrator can add
priority tags to the video packets being sent out, utilizing the Access Profile commands. Then, on the receiving end, the
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 9- 1. Mapping QoS on the Switch
Section 9
235