X User; Initialize Port(S) - D-Link DGS-3600 Series User Manual

802.1X User

This window allows the user to set different local users on the Switch.
To view this window, click Security > 802.1X > 802.1X User, as shown below.
Enter a User Name, Password and confirmation of that password. Properly configured local users will be displayed in the 802.1X
User Table in the same window.

Initialize Port(s)

Existing 802.1X port and MAC settings are displayed and can be configured using the window below.
To view this window, click Security > 802.1X > Initialize Port(s), as shown below.
This window allows initialization of a port or group of ports. The Initialize Port Table in the bottom half of the window displays
the current status of the port(s).
To initialize ports for the MAC side of 802.1X, the user must first enable 802.1X by MAC address in the DGS-3600 Web
Management Tool window.
Click Security > 802.1X > Initialize Port(s), as shown below:
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 11- 21. 802.1X User window
Figure 11- 22. Initialize Port window (Port-based 802.1X)
Figure 11- 23. Initialize Ports window (MAC-based 802.1X)
297