Authentic Radius Server - D-Link DGS-3600 Series User Manual
Layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for DGS-3600 Series:
- Cli manual (431 pages) ,
- User manual (422 pages) ,
- Hardware installation manual (66 pages)
Table of Contents
Advertisement
Authentic RADIUS Server
The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection against
a sniffing, active hacker. The Web Manager offers three windows.
To view this window, click Security > 802.1X > Authentic RADIUS Server, as shown below.
This window displays the following information:
Parameter
Description
Succession
Choose the desired RADIUS server to configure: First, Second or Third.
RADIUS Server
Set the RADIUS server IP.
Authentic Port
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port
Set the RADIUS account server(s) UDP port. The default port is 1813.
Key
Set the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Status
This allows users to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 11- 26. Authentic RADIUS Server window
300
Advertisement
Table of Contents
