D-Link DGS-3600 Series User Manual page 292

Access ID Type in a unique identifier number for this access. This value can be set from 1 to 100.
Type Selected profile based on Ethernet (MAC Address), IP address, Packet Content Mask, or IPv6.
Offset This field will instruct the Switch to mask the packet header beginning with the offset value
specified:
Port The CPU Access Rule may be configured on a per-port basis by entering the port number of the
Switch.
Time Range Click the check box and enter the name of the Time Range settings that has been previously
configured in the Time Range Settings window. This will set specific times when this CPU
access rule will be implemented on the Switch.
To view the settings of a previously correctly configured rule, click
Figure 10- 39. CPU Interface Filtering Entry Display window (Packet Content)
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Ethernet instructs the Switch to examine the layer 2 part of each packet header.

IP instructs the Switch to examine the IP address in each frame's header.

Packet Content Mask instructs the Switch to examine the packet header.

IPv6 instructs the Switch to examine the IPv6 part of the packet header.

value (0-15) - Enter a value in hex form to mask the packet from the beginning of

the packet to the 15th byte.
value (16-31) - Enter a value in hex form to mask the packet from byte 16 to byte

31.
value (32-47) - Enter a value in hex form to mask the packet from byte 32 to byte

47.
value (48-63) - Enter a value in hex form to mask the packet from byte 48 to byte

63.
value (64-79) - Enter a value in hex form to mask the packet from byte 64 to byte

79.
in the Access Rule Table to view the following window:
274