Port Utilization - D-Link DGS-3600 Series User Manual

Port Utilization

This window displays the percentage of the total available bandwidth being used on the port.
To view the port utilization, click Monitoring > Port Utilization, as shown below.
Select a Port number from its drop-down menu and click Apply to display the Port Utilization for a particular port. The following
fields can be set:
Parameter Description
Time Interval
Record Number
Show/Hide
Click Clear to refresh the graph. Click Apply to set changes implemented.
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 12- 5. Port Utilization window
Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Check whether to display Port Utilization.
333