D-Link DGS-3600 Series User Manual page 228

Users may view statically bound DHCP entries within a DHCP pool by entering the Pool Name and clicking Find. Results will be
displayed in the window above. To set a manual DHCP Binding entry, click the Add window, which will produce the following
window to configure.
The following parameters may be configured or viewed.
Parameter Description
Pool Name Enter the name of the DHCP pool within which will be created a manual DHCP binding entry.
Enter the IP address to be statically bound to a device within the local network that will be specified
IP Address
by entering the Hardware Address in the following field.
Enter the MAC address of the client to be statically bound to the IP address entered in the previous
Hardware
Address field.
Type This field is used to specify the type of connection for which this manually bound entry will be set.
Ethernet will denote that the manually bound device is connected directly to the Switch, while the
IEEE802 denotes that the manually bound device is outside the local network of the Switch.
Click Apply to set the entry.
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 8- 64. DHCP Server Manual Binding Table window
Figure 8- 65. Create DHCP Pool Manual Binding window
210