Separating Copies By Sets ("Sort" Setting) - Konica Minolta FS-505 User Manual

2

Separating copies by sets ("Sort" setting)

0 As the default setting, "Group" is selected.
0 If "Offset" is selected while a finisher is installed, printed copies are fed
out and stacked on top of each other with each set shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Sort].
– To separate each set of copies, touch [Offset]. To cancel the
setting, touch [Offset] again to deselect it.
3
Touch [OK].
The Basic screen appears again.
2-6
Copy operations
Finisher FS-505