Selecting A Gps Memory Channel; Editing Gps Memory; Protecting Memory - Icom IC-A220 Instruction Manual

3
MEMORY OPERATION
■ Selecting a GPS memory
channel
When connected to an external GPS receiver* with an airport
frequency database, you can transfer frequency data such as
nearby airports to the GPS memory (maximum 10 memory
channels).
*Ask your dealer for available GPS receiver details.
NOTE:
Refer to the GPS receiver's instruction manual for
transferring the frequency data.
Push [RCL] to enter the memory mode.
q
[O-DIAL] to select "GPS."
Rotate
w
Rotate [DIAL] to set a desired GPS memory channel.
e
r Push [RCL] to exit the memory mode.
13
Airport code
GPS RJTJ
122.00
122.05
5
CH01 TWR
Tag name

Editing GPS memory

■
The received GPS memory data is stored in the desired group
memory channel.
NOTE:
The GPS memory data is overwritten if the se-
lected GPS memory channel already contains other data.
Push [RCL] to enter the memory mode.
q
[O-DIAL] to select "GPS."
Rotate
w
• "GPS" is displayed.
Push [MEM] to enter the GPS memory channel edit mode,
e
then rotate [O-DIAL] to select a desired group memory.
• "GPS" and airport code blink.
Push [MEM] to store the GPS memory channel data to the
r
selected group memory.
[RCL] to exit the memory mode.
Push
t

■ Protecting memory

The transceiver has memory protection which inhibits the ed-
iting (storing, deleting, replacing, and so on) of the regular
memory and group memory.
Refer to 'Memory Protection' (p. 22) for details.