Error And Status Messages; Error And Status Messages On The Message Display Panel - Lanier 5222 Operator's Manual

Error and Status Messages

Error and Status Messages on the Message Display Panel

This section describes instructions for error and status message of the printer function. To use the
printer function, press [Printer].
Troubleshooting
Messages Description
Add Staples The stapler is empty.
Cannot Output The paper can not be printed to
To Selected Tray the output tray that you
selected.
Dup. Unit In Use AD370 (duplex unit) is used by
Please Wait the other application.
Error 1 An error with the optional RAM
has occurred.
Error 2 An error with the parallel
interface board has occurred.
Error 3 An error with the NV-RAM has
occurred.
Error 4 An error with the DIMM has
occurred.
Error 5 An error with the HDD has
occurred.
Error 6 An error with the Resident font
ROM has occurred.
Error 7 An error with the ASIC has
occurred.
Error and Status Messages
Comments
Replace the staple refill with a
new one.
The paper is printed to another
tray that selected by printer.
Wait until the other application
finished to use AD370 (duplex
unit).
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Install the HDD again. If the
message appears again,
contact your sales or service
representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
6 - 1