Deploy The Wireless Controller - NETGEAR ProSafe WC7520 Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
The wireless controller is suitable for use in an office environment where it can be
freestanding on its runner feet or mounted into a standard 19-inch equipment rack.
Alternatively, you can rack-mount the wireless controller in a wiring closet or equipment
room. A mounting kit containing two mounting brackets and screws is provided in the
wireless controller package.
Consider the following when deciding where to position the wireless controller:
The unit is accessible and cables can be connected easily.
•
Cabling is away from sources of electrical noise. These include lift shafts, microwave
•
ovens, and air-conditioning units.
Water or moisture cannot enter the case of the unit.
•
Airflow around the unit and through the vents in the side of the case is not restricted.
•
Provide a minimum of 25 mm or 1 inch clearance.
The air is as free of dust as possible.
•
Temperature operating limits are not likely to be exceeded. Install the unit in a clean,
air-conditioned environment.
Chapter 1: Introduction and Overview | 19