Managing Access Point Groups In The Wlan - NETGEAR ProSafe WC7520 Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
This screen shows the existing groups by tab. Each group shows its name, radio mode,
and authentication setting.
Click the + button to add another group.
2.
To specify profile definition settings, select a group tab and click the Edit button. The Edit
3.
Profile screen displays:
Figure 36. Profile Definition for Access Point Groups
Configure the profile for the access point group. These settings are explained in
4.
Basic Security Profile
Click Apply to save your settings.
5.

Managing Access Point Groups in the WLAN

By default all access points are in the basic group. You can use this screen to assign access
points to access point groups.
Definition.
Chapter 6: Managing Access Point Groups
Some
selections here
cause the
Authentication
Server field
to display.
Table 22,
| 63