Managing Authentication Servers And Authentication Server Groups - NETGEAR ProSafe WC7520 Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
To set up MAC authentication for only the selected access point group:
Select Configuration > Security >Advanced > MAC Authentication. The Advanced
1.
MAC Authentication screen displays:
Figure 54.
Click a tab to select the access point group that will use access control.
2.
Configure the settings as explained in
3.
Make sure that the correct wireless stations are in the Trusted Wireless Stations list. If you
4.
are using access control, only these stations will be allowed access to the network through
this access point.
To remove a wireless station from this table, select it and click Delete.
-
To add a wireless station to this table, enter its MAC address and click Add.
-
To move a wireless station from the Available Wireless Stations list to the Trusted
-
Wireless Stations list, select it, and click Move.
Click Apply so that your changes take effect.
5.
Managing Authentication Servers and Authentication
Server Groups
You can specify three kinds of authentication servers, internal RADIUS, external RADIUS, or
external LDAP.
Internal RADIUS: The wireless controller handles authentication, and you are not using
•
another server for this purpose. If you use this setting, set up Wi-Fi clients on the
Maintenance tab.
External RADIUS: You can define an external RADIUS server. You must specify its
•
configuration here in the Authentication Server screen so that you will be able to select
this option for profiles that use this authentication method.
Table 27, MAC Authentication
Chapter 8: Configuring Security and Wireless Security Profiles
on page 91.
| 93