NETGEAR ProSafe WC7520 Reference Manual page 90

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
To configure advanced rogue access point detection:
Select Configuration > Security > Advanced > Rogue AP. The Advanced Rogue AP
1.
screen displays:
Figure 52.
You can import a list of known access points from a file or choose access points as known
2.
from a list of neighbor or rogue access points. This feature locates the approximate position
of the access point on the floor plan based on the last known data.
The wireless controller can support up to 512 total rogue access points from the Known
and Unknown lists combined.
Configure the settings as explained in
3.
Click Apply to save your settings.
4.
Table 26. Advanced Rogue AP Detection
Setting
Import Known List
Merge or Replace
Known AP List
Unknown AP List
Table 26, Advanced Rogue AP
Description
You can use a text file of SSIDs to populate this screen. See
Known Access Points from a File
• Merge: The current list is maintained, and the access points in the imported list will
be added to the approved list and the Known AP List.
• Replace: The current list is discarded. Only the access points in the imported list
will be shown in the approved list and the Known AP List.
Approved access points. To remove an access point from this list, select its check
box and click Delete.
Detected unidentified access points.
Chapter 8: Configuring Security and Wireless Security Profiles
Detection.
on page 90.
Importing a List of
| 89