NETGEAR ProSafe WC7520 Reference Manual page 101

Figure 59.
The Backup/Restore screen lets you:
Back up and save a copy of the current settings
•
Restore saved settings from the backed-up file
•
To back up the configuration file:
On the Backup/Restore Settings screen (see
1.
save a copy of your current settings. A dialog box displays, showing the file name of the
backup file. The backup file has the following format: backup.tar.gz.
Follow the instructions of your browser to save the configuration file.
2.
To restore the configuration file:
On the Backup/Restore Settings screen (see
1.
Navigate to the saved configuration file.
2.
Click Apply to load the configuration file. The wireless controller reboots.
3.
WARNING!
When you restore the configuration file, do not try to go online,
turn off the wireless controller, shutdown the computer, or do
anything else to the wireless controller until the wireless
controller finishes rebooting! When the Test light turns off, wait a
few more seconds before you do anything.
Restore only settings that were backed up from the same software
Note:
version.
100 | Chapter 9: Maintaining the Controller
ProSafe 20-AP Wireless Controller WC7520 Reference Manual
59), click the Backup button to
Figure
59), click the Browse button.
Figure